How to Replacing RC Helicopter Battery

It is undeniable that the battery has a lifespan and must be changed. Long-short battery life is highly dependent of how to care for the battery.
Signs of battery should be replaced, among others:

• shorter charging time
• physical battery tubby

Broken balancer

Modification spirit again, facing a broken balancer, if you do not want to bother you can replace and install a new one, but if you want to improve, following this a bit more could help.
The possibility of fracture can occur in three places: at the end of the outer, middle or base of the balancer.

Repairs can be done is by gluing using power glue or epoxy glue. To strengthen the connection can plug pins in the middle of both broken rod and or give socket covering the broken part.

Tips on choosing rc helicopter

Choosing rc helicopter is sometimes confusing, especially choose the first helicopter, following a little input to the basic considerations to choose heli

mini or medium or big size?
selection depends on the amount of money that will be issued and the willingness of places to fly helicopters, big/jumbo heli is certainly more expensive than mini helicopters, and a big helicopters also need larger play area than the mini helicopters. For the first heli it is advisable to choose the mini size or medium, because the amount spent is not too big either to buy helicopters and spare parts, and also not to be confused to find a place to play, even a mini heli comfortable playing in the room, after familiar and have a place wider then switch to jumbo size.

How to Disassemble RC Helicopter

If you have a hobby modification, there are a few tips to disassemble rc helicopter, things that need attention:

• prepare a place to disassemble, try not mixed with other stuff
• prepare the suitable screwdriver
• separate screw/bolt according to the group that disassembled
• at the time of installation again, do not tighten the screwdriver too strong, because it can make a bolt/screw is wear out, tighten just enough

RC Helicopter fallen into the water

hiks . . .  scary, saw Red DJ get into trench.

Yesterday afternoon playing u802 in  the yard while being windy, helicopters suddenly lost control in the wind, then went into trench
but do not panic when deal with anything like this, follow these steps:

Outer shaft bent on Syma S107

Bent shaft can cause the heli vibrate and also fly unstable.
It is certain to straighten it must remove the outer shaft, the easiest way to straighten the shaft put on a flat surface, usually above the glass, turn slowly while watching the bent position, then straighten, repeat until the shaft straight.
For S107 there are actually parts of helicopters that can be directly used as the outer shaft that is tail support, you only need to move  the gear and plug
More details, see also 3ch RC Helicopter Parts

Related Posts:

• Shaft slip - RC helicopters can not fly
• How to Replacing RC Helicopter Battery
• Broken balancer
• How to Disassemble RC Helicopter
• RC Helicopter fallen into the water
• 3ch RC Helicopter Parts

Learn Flying 3ch RC Helicopter

The most important thing in learning to fly RC Helicopter 3ch that is not in  a hurry, mastered in stages and should  be confident.

Shaft slip - RC helicopters can not fly

Do not panic if all of a sudden the helicopters won't fly when the blade  rotates, it could happen due to the hard crash. Try checking the inner gear shaft by holding your gear and then manually rotate the upper blade slowly, if the blade rotating means inner shaft tucked. There are two possible location of its slip, could be in balancer holder or gear.
Remove the balancer holder of the shaft, try again to hold the gear and then manually rotate the inner shaft, if slip is a problem in gear, if not slip means that the problem  occurs at the balancer holder.

3ch RC Helicopter Parts

Even though only as a player it never hurts to know the components in the heli
Just choose, only want to play, or also make modifications hobby even repair.
If you intend to disassembly  could see on the How to Disassemble RC helicopter
Here are  the common components found on the RC helicopter 3ch:

Related Posts:

• How to Replacing RC Helicopter Battery
• Broken balancer
• How to Disassemble RC Helicopter
• RC Helicopter fallen into the water
• Outer shaft bent on Syma S107
• Shaft slip - RC helicopters can not fly

My Red DJ

Here's my favorite helicopter, I give the name Red DJ, is a mini heli 3ch infrared from udiR/C type U802 , interested during  the first try, well suited with my playing style
when was the original pic:

Explanation the number of channels on the RC Helicopter

Here's the difference RC Helicopter by number of  channels (ch)

• 2 ch: up/down, rotate left/right
• 3 ch: up/down, rotate left/right, forward/backward
• 4 ch: up/down, rotate left/right, forward/backward, laterally left/right
• 6 ch: up/down, rotate left/right, forward/backward, laterally left/right, flying upside down

Related Posts:

• Tips on choosing rc helicopter
• How to Disassemble RC Helicopter
• Learn Flying 3ch RC Helicopter
• 3ch RC Helicopter Parts
• How to Caring Battery RC Helicopter

How to Caring Battery RC Helicopter

Maybe you already  familiar with playing a RC Helicopter , but there is nothing wrong  reading the following battery maintenance tips