Page

▼

Saturday, January 8, 2011

Broken balancer

Modification spirit again, facing a broken balancer, if you do not want to bother you can replace and install a new one, but if you want to improve, following this a bit more could help.
The possibility of fracture can occur in three places: at the end of the outer, middle or base of the balancer.

Repairs can be done is by gluing using power glue or epoxy glue. To strengthen the connection can plug pins in the middle of both broken rod and or give socket covering the broken part.

Giving pin can be done by: drill a hole in the both balancer rod that broke about 5 mm (depending on size of balancer rod), then drops power glue on the both hole and insert the pin at the same time to do connecting.
Installation of socket is done by covering the broken parts with plastic or PVC pipe, the aim is increase the power connection.

If the broken at the end of the outside right on the ballast may be difficult to do connecting. The solution is to not connect, but gives a weight at the end of, to be wrapped around tin solder and glue so that the location of loops are not shifted. Should be done also on the other side by cutting the balancer in the same position, the goal to keep it balanced.

It should be noted, after completion connecting should balance both sides of the balancer was observed, if the balancer is not balanced will disturb the stability of helicopters, usually jointed sections will be more heavy because the given socket or pin, the solution by giving the socket on the part that is not broken, the slide socket to get a balance.

as usual, helicopters do not directly play, allow 24 hours or more for perfect bonding.


Related Posts:
at

14 comments:

  1. Dr Farra JumuddinJanuary 8, 2011 at 10:23 PM

    alaaaa.... kesiannye

    ReplyDelete
  2. sibutizJanuary 10, 2011 at 9:51 AM

    hhe hhe,
    saya kurang tahu ka....
    makasih.

    ReplyDelete
  3. AdvertJanuary 10, 2011 at 1:58 PM

    wah kayak punya saya,.. patah,..
    di lem bisa tapi tetep gak imbang,..

    ReplyDelete
  4. Software House ProductionJanuary 16, 2011 at 1:18 AM

    Kemarin punya saya habis nabrak tembok. Tapi untungnya kipasnya mutunya baik jadi nggak patah...hehehe...Salam kenal...sob

    ReplyDelete
  5. Penghuni 60January 18, 2011 at 4:58 PM

    wah, punya saya nyemplung tuh, gak tanggung2 lg, nyemplungnya di laut... hehe...
    :)

    ReplyDelete
  6. ehm kommunikaJanuary 19, 2011 at 9:02 PM

    nice sob,,,keep blogging,,,

    ReplyDelete
  7. IlhamJanuary 19, 2011 at 9:32 PM

    Tentang heli yaa ..
    saya kurang ngerti gan ..
    tapi thanks lah infonnya .. :D

    ReplyDelete
  8. Dunia BerkaryaJanuary 20, 2011 at 6:51 PM

    sungguh kreatif bisa membuat helikopter yang unik, i like your post and keep posting

    ReplyDelete
  9. situsonlinehJanuary 23, 2011 at 5:23 PM

    kuran paham neh

    ReplyDelete
  10. SantroJanuary 25, 2011 at 9:20 AM

    Hi Friend visiting ur nice blog. Can u follow me i will follow you

    Thanks in advance

    at least visit me..

    ReplyDelete
  11. HartoJanuary 25, 2011 at 9:32 AM

    saya pernah beli helicoptr yg spt diatas gambarnya (cuma warna hijau), harganya lumayan cukup mahal, ga ada satu hari umurnya dah rusak (makluuum untuk anak, saking senengnya dbeliin), sampai skarang blum diservis dah ditanya k tokonya langsung biaya servicenya cukup mahal akhirnya jadi pajangan diatas lemari..... hhhhhhhhhhhh, kaciaan deeeh anakku.

    ReplyDelete
  12. ValterJanuary 29, 2011 at 6:21 PM

    Hello my friend, thank you very much for your visit, good weekend with peace and happiness. Hugs Valter.

    ReplyDelete
  13. KameraFotoMarch 21, 2011 at 11:30 AM

    ne yang menimpa RC ane bos,... T_T dah di lem denga rapinya tapi tetap gak mau stabil... T_T

    ReplyDelete
  14. tinoJanuary 26, 2013 at 4:35 AM

    tanya gan beli motor untuk heli mini fq777 dimana ya?

    ReplyDelete